Vertigo Bass Guitar Case, Black

We’ve seen it (and done it) hundreds of times: grabbing the bass out of the side of a partially unzipped case while standing up. We do this to save space, to save time, or to save our backs. This observation became the driving concept behind the Vertigo, the world’s first top-loading guitar case. The top loading feature might have been enough, but the Headlock® has been redesigned for automatic neck support. Then The Boot® was created, a rubber sole designed for unsurpassed protection against vertical drops. The game has changed.

LOCK AND LOAD

The Vertigo features a fully redesigned Headlock® neck suspension system. No strapping, buckling, or belting required. Just throw your bass in and the neck finds a natural resting point in the base of the Headlock®. Then zip the case up and the top section of the Headlock® automatically clamps down over your bass, holding it firmly in place. Your headstock is now fully protected against backward drops and side-to-side impact. Lightning fast!

DROP-PROOF

Another first of its kind, The Boot® takes guitar protection to a new level. Using manufacturing technologies from the footwear industry, the Vertigo bounces off of concrete like a pair of cross trainers. With its custom molded rubber outsole and EVA insole, The Boot® also protects strap pins of all shapes and sizes from those nasty vertical drops. Travel in confidence and style. It’s a good look.

IMPACT DEFLECTION

Integral ABS panels deliver hardcase protection at a fraction of the weight. (MONO cases weigh in at about 75% less than their hardcase counterparts.) The reinforced outer shell of the Vertigo absorbs and deflects hard impact away from the vulnerable areas of the bass.

SMART STORAGE

Most MONO cases come equipped with the triple D-ring attachments required for the optional Classic Tick Accessory Case, the modular tool case designed to extend the storage capacity of your guitar case. The Classic Tick Accessory Case seamlessly and securely attaches to the case as shown. Some older cases may not be Tick-ready – please contact support if you have questions about the Tick-compatibility of your MONO case.

PLUG AND PLAY

Everything in its place. Specialized storage compartments put your gear right where you need it. Deep gussets make sure your small items stay put.

BUILT TO LAST

WEAR IT OUT

MONO cases are built to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. Outside, the water-resistant Sharkskin shell keeps you on the move, rain or shine. 100% animal free.

RIVETED HANDLE & HARD-WEARING SOLE

Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high-grade webbing provides a super comfortable grip.

The Vertigo features a molded rubber sole and piping made of Hypalon – the same industrial rubber used to create inflatable military rafts. This sole simply does not wear out.

DIMENSIONS & FITTING

LIKE A GLOVE

This case is designed to fit all standard body and some not-so-standard basses. The molded Vertigo Headlock® fits standard and wide-width guitar necks. Please check with support if you are unsure about the fit for your particular bass.

Internal Dimensions: 48″ x 14.5″ x 3″ (121.9cm x 36.8cm x 7.6cm)
External Dimensions: 49.6″ x 18.9″ x 5.5″ (126.0cm x 48.0cm x 14.0cm)
External Pocket Dimensions: 7″ (Short) / 17″ (Tall) x 15″ x 1″ (17.8cm / 43.2cm x 38.1cm x 2.5cm)
Weight: 6lbs (2.7kg)

The post Mono Vertigo Bass Guitar Case – M80-VEB-BLK appeared first on Matt's Music Center.

Vertigo Acoustic Guitar Case, Black

Combining manufacturing methods from military, footwear and extreme outdoor industries, the Vertigo represents not only superior guitar protection, but a technological advancement in luggage design. The Vertigo is light, fast, sleek and rugged. Thanks to some serious design, traveling with a guitar has never been this fun.

GRAB AND GO

A slick feature that you will come to love. The Vertigo does not open like a traditional guitar case. Its design allows you to quickly unzip the case and pull your guitar out from the top. This is enabled by a hidden diagonal hinge on the front panel of the case. Once unzipped, the case naturally opens out and to the right. No need to lay your guitar case down on the floor. Take a stand.

LOCK AND LOAD

The Vertigo features a fully redesigned Headlock® neck suspension system. No strapping, buckling, or belting required. No extra steps. Just throw your guitar in and the neck finds a natural resting point in the base of the Headlock®. Then zip the case up and the top section of the Headlock® automatically clamps down over your guitar, holding it firmly in place. Your headstock is now fully protected against backward drops and side-to-side impact. Lightning fast!

DROP-PROOF

Another first of its kind, The Boot® takes guitar protection to a new level. Using manufacturing technologies from the footwear industry, the Vertigo bounces off of concrete like a pair of cross trainers. With its custom molded rubber outsole and EVA insole, The Boot® also protects strap pins* from those nasty vertical drops. Despite its serious design, the Vertigo just wants to have fun.

STRAP PIN PROTECTION

The insole/outsole combination of The Boot® design keeps the strap pin* off the ground even during hard vertical drops.

Integral ABS panels deliver hardcase protection at a fraction of the weight. (MONO cases weigh in at about 75% less than their hardcase counterparts.) The reinforced outer shell of the Vertigo absorbs and deflects hard impact away from the vulnerable areas of the guitar.

*Offset guitar strap pins may receive less protection from The Boot®

SMART STORAGE

Most MONO cases come equipped with the triple D-ring attachments required for the optional Classic Tick Accessory Case, the modular tool case designed to extend the storage capacity of your guitar case. The Classic Tick Accessory Case seamlessly and securely attaches to the case as shown. Some older cases may not be Tick-ready – please contact support if you have questions about the Tick-compatibility of your MONO case.

PLUG AND PLAY

Everything in its place. Specialized storage compartments put your gear right where you need it. Deep gussets make sure your small items stay put.

BUILT TO LAST

WEAR IT OUT

MONO cases are built to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. Outside, the water-resistant Sharkskin shell keeps you on the move, rain or shine. 100% animal free.

HARD-WEARING SOLE & RIVETED HANDLE

Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high grade webbing provides a super comfortable grip.

The Vertigo features a molded rubber sole and piping made of Hypalon – the same industrial rubber used to create inflatable military rafts. This sole simply does not wear out.

DIMENSIONS & FITTING

LIKE A GLOVE

These measurements represent the inner capacity of the case. If you are unsure about the fit for your guitar, make sure it does not exceed any of the maximum dimensions shown just to be safe. This case is designed to fit all standard body acoustic dreadnought guitars including Martin, Taylor, Yamaha, Gibson and others. Also suitable for most archtops. Please check with support if you have any questions about fitting.

Internal Dimensions: 42″ x 16″ x 4.5″ (106.7cm x 38.1cm x 11.4cm)
External Dimensions: 46″ x 18.3″ x 8.2″ (116.8cm x 46.5cm x 20.8cm)
External Pocket Dimensions: 9″ (Short) / 17″ (Tall) x 17″ x 1.5″ (22.9cm / 43.2cm x 43.2cm x 3.8cm)
Weight: 120oz (3.3kg)

The post Mono Vertigo Acoustic Case – M80-VAD-BLK appeared first on Matt's Music Center.

Vertigo Electric Guitar Case, Black

Combining manufacturing methods from military, footwear and extreme outdoor industries, the Vertigo represents not only superior guitar protection, but a technological advancement in luggage design. The Vertigo is light, fast, sleek and rugged. Thanks to some serious design, traveling with a guitar has never been this fun.

GRAB AND GO

A slick feature that you will come to love. The Vertigo does not open like a traditional guitar case. Its design allows you to quickly unzip the case and pull your guitar out from the top. This is enabled by a hidden diagonal hinge on the front panel of the case. Once unzipped, the case naturally opens out and to the right. No need to lay your guitar case down on the floor. Take a stand.

LOCK AND LOAD

The Vertigo features a fully redesigned Headlock® neck suspension system. No strapping, buckling, or belting required. No extra steps. Just throw your guitar in and the neck finds a natural resting point in the base of the Headlock®. Then zip the case up and the top section of the Headlock® automatically clamps down over the neck, holding it firmly in place. Your headstock is now fully protected against backward drops and side-to-side impact. Lightning fast!

DROP-PROOF

Another first of its kind, The Boot® takes guitar protection to a new level. Using manufacturing technologies from the footwear industry, the Vertigo bounces off of concrete like a pair of cross trainers. With its custom molded rubber outsole and EVA insole, The Boot® also protects strap pins* from those nasty vertical drops. Despite its serious design, the Vertigo just wants to have fun.

STRAP PIN PROTECTION

The insole/outsole combination of The Boot® design keeps the strap pin* off the ground even during hard vertical drops.

Integral ABS panels deliver hardcase protection at a fraction of the weight. (MONO cases weigh in at about 75% less than their hardcase counterparts.) The reinforced outer shell of the Vertigo absorbs and deflects hard impact away from the vulnerable areas of the guitar.

*Offset guitar strap pins may receive less protection from The Boot®

TICK-READY

Most MONO cases come equipped with the triple D-ring attachments required for the optional Classic Tick Accessory Case, the modular tool case designed to extend the storage capacity of your guitar case. The Classic Tick Accessory Case seamlessly and securely attaches to the case as shown. Some older cases may not be Tick-ready – please contact support if you have questions about the Tick-compatibility of your MONO case.

PLUG AND PLAY

Everything in its place. Specialized storage compartments put your gear right where you need it.

A small interior mesh pocket keeps those little, critical items close at hand.

WEAR IT OUT

MONO cases are built to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. Outside, the water-resistant Sharkskin shell keeps you on the move, rain or shine. 100% animal free.

HARD-WEARING SOLE & RIVETED HANDLE

The Vertigo features a molded rubber sole and piping made of Hypalon – the same industrial rubber used to create inflatable military rafts. This sole simply does not wear out.

Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high grade webbing provides a super comfortable grip.

LIKE A GLOVE

These measurements represent the inner capacity of the case. If you are unsure about the fit for your guitar, make sure it does not exceed any of the maximum dimensions shown just to be safe. This case is designed to fit all standard body electric guitars including Fenders like Teles and Strats, Gibsons like Les Pauls and SGs, Ibanez, ESP. Also fits some not-so-standard guitars. The molded Vertigo Headlock® fits standard and wide-width guitar necks (6, 7 and 8 strings). Please check with support if you are unsure about the fit for your particular guitar.

Internal Dimensions: 41.5″ x 14.5″ x 3″ (105.4cm x 36.8cm x 7.6cm)
External Dimensions: 44.5″ x 18.9″ x 5.5″ (113.0cm x 48.0cm x 14.0cm)
External Pocket Dimensions: 7″ (Short) / 17″ (Tall) x 15″ x 1″ (17.8cm / 43.2cm x 38.1cm x 2.5cm)
Weight: 5.5lbs (2.5kg)

The post Mono Vertigo Electric Guitar Case – M80-VEG-BLK appeared first on Matt's Music Center.

Classic Dual Electric Guitar Case, Black

A second guitar is a must-have on stage or in the studio. But in transit, carrying two guitars has always been a necessary evil. We set out to design an elegant solution to this problem. Our driving criteria was to offer each guitar the same protection as our single M80 hybrid case. After a year of prototyping, the Z-form design was perfected (patents pending). The end result is an incredibly light weight, extremely rugged Classic Dual Electric Guitar Case. A first of its kind. Go play.

360° PROTECTION

DROP-PROOF

The patented Headlock® design provides a level of protection worthy of the finest instruments. Your guitars quickly strap in and remain stabilized during transport. The headstocks of both guitars are suspended inside the case, saving them from both side and rear impacts.

STRAP PIN PROTECTION

Hi-density foam bumpers divert vertical impacts out and around the case, away from the strap pin.

Integral ABS panels deliver hardcase protection at a fraction of the weight. The reinforced outer shell of the M80 hybrid case absorbs and deflects hard impact away from the vulnerable areas of the guitar.

BUILT TO LAST

WEAR IT OUT

We build our cases to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. Outside, the water-resistant Sharkskin shell keeps you on the move, rain or shine. 100% animal free.

HYPALON SOLE & RIVETED HANDLE

All M80 cases feature a hard-wearing sole and piping made of Hypalon – the same industrial rubber used to create inflatable military rafts. This sole simply does not wear out.

Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high grade webbing provides a super comfortable grip.

DIMENSIONS & FITTING

LIKE A GLOVE

These measurements represent the inner capacity of the case. If you are unsure about the fit for your guitar, make sure it does not exceed any of the maximum dimensions shown just to be safe. This case is designed to fit two standard body electric guitars including Fenders like Teles and Strats, Gibsons like Les Pauls and SGs, Ibanez, ESP and many others.

Internal Dimensions: 41.5″ x 14.5″ x 2″ each side (105.4cm x 36.8cm x 5.1cm)
External Dimensions: 43.3″ x 17.3″ x 6.7″ (101.0cm x 43.9cm x 17.0cm)
External Pocket Dimensions: 11″ x 14.5″ x 1.5″ (27.9cm x 36.8cm x 3.8cm)
Weight: 4.82lbs (4.00kg)

The post Mono Classic Dual Electric Guitar Case – M80-2G-BLK appeared first on Matt's Music Center.

The Classic Bass Guitar Case can be found in the hands of influential musicians from Brooklyn to Seoul to Sao Paulo and everywhere in between. Its patented protective features and light weight hybrid shell revolutionized the way we travel with our guitars, and brought musician luggage into the 21st century. Years of feedback from working artists has driven countless tiny improvements, proving that this original design just gets better with time. If you own a bass, you should own a MONO.

360° PROTECTION

DROP-PROOF

The patented Headlock® design provides a level of protection worthy of the finest instruments. Your guitar quickly straps in and remains stabilized during transport. The headstock is suspended inside the case, saving the guitar from both side and rear impacts that could otherwise snap the neck. Extensive testing reveals that “Hardcase protection” is a myth, as the Headlock® – equipped M80 outperforms traditional wood and plastic hard cases in every way.

IMPACT DEFLECTION & STRAP PIN PROTECTION

Integral ABS panels deliver hardcase protection at a fraction of the weight (MONO cases weigh in at about 75% less than their hardcase counterparts.) The reinforced outer shell of the M80 hybrid case absorbs and deflects hard impact away from the vulnerable areas of the bass.

Hi-density foam bumpers divert vertical impacts out and around the lower bout of the bass, away from the strap pin.

SMART STORAGE

Most MONO cases come equipped with the triple D-ring attachments required for the optional Classic Tick Accessory Case, the modular tool case designed to extend the storage capacity of your guitar case. The Classic Tick Accessory Case seamlessly and securely attaches to the case as shown. Some older cases may not be Tick-ready – please contact support if you have questions about the Tick-compatibility of your MONO case.

PLUG AND PLAY

Everything in its place. Specialized storage compartments put your gear right where you need it.

SECRET STASH

The hidden upper pocket keeps your wallet, keys, and cell concealed. Pen slots double as tool storage. Business card storage and a durable key clip is also included.

BUILT TO LAST

WEAR IT OUT

We build our cases to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. So rain or shine, your bass rides first class while you launch an urban assault. 100% animal free.

RIVETED HANDLE

Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high grade webbing provides a super comfortable grip.

HYPALON SOLE

All M80 cases feature a hard-wearing sole and piping made of Hypalon – the same industrial rubber used to create inflatable military rafts. This sole simply does not wear out.

DIMENSIONS & FITTING

LIKE A GLOVE

These measurements represent the inner capacity of the case. If you are unsure about the fit for your guitar, use this diagram as a guide and. This case is designed to fit standard body electric bass guitars including Fender, Ibanez, Fodera, Warwick, Tobias, Yamaha and many others. Please check with support if you are unsure about the fit for your particular bass.

Internal Dimensions: 48″ x 14.5″ x 3″ (121.9cm x 36.8cm x 7.6cm)
External Dimensions: 49.2″ x 16.5″ x 4.7″ (125.0cm x 41.9cm x 11.9cm)
External Pocket Dimensions: 11″ x 14.5″ x 1.5″ (27.9cm x 36.8cm x 3.8cm)
Weight: 6.2lbs (2.8kg)

The post Mono M80 Classic Bass Guitar Case – M80-EB-BLK appeared first on Matt's Music Center.

The Classic Acoustic/Dreadnought Guitar Case can be found in the hands of influential musicians from Brooklyn to Seoul to São Palo and everywhere in between. Its patented protective features and light weight hybrid shell revolutionized the way we travel with our guitars, and brought musician luggage into the 21st century. Years of feedback from working artists has driven countless tiny improvements, proving that this original design just gets better with time. If you own a guitar, you should own a MONO.

360° PROTECTION

DROP-PROOF

The patented Headlock® design provides a level of protection worthy of the finest instruments. Your guitar quickly straps in and remains stabilized during transport. The headstock is suspended inside the case, saving the guitar from both side and rear impacts that could otherwise snap the neck. The result is a super light case that is ready for anything life brings.

STRAP PIN PROTECTION

Hi-density foam bumpers divert vertical impacts out and around the lower bout of the guitar, away from the strap pin.

Integral ABS panels deliver hardcase protection at a fraction of the weight. (MONO cases weigh in at about 75% less than their hardcase counterparts.) The reinforced outer shell of the M80 hybrid case absorbs and deflects hard impact away from the vulnerable areas of the guitar.

Most MONO cases come equipped with the triple D-ring attachments required for the optional Classic Tick Accessory Case, the modular tool case designed to extend the storage capacity of your guitar case. The Classic Tick Accessory Case seamlessly and securely attaches to the case as shown. Some older cases may not be Tick-ready – please contact support if you have questions about the Tick-compatibility of your MONO case.

PLUG AND PLAY

Everything in its place. Specialized storage compartments put your gear right where you need it.

The hidden upper pocket keeps your wallet, keys, and cell concealed. Pen slots double as tool storage. Business card storage and a durable key clip are also included.

BUILT TO LAST

WEAR IT OUT

We build our cases to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. Outside, the water-resistant Sharkskin shell keeps you on the move, rain or shine. 100% animal free.

RIVETED HANDLE & HYPALON SOLE

Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high grade webbing provides a super comfortable grip.

All M80 cases feature a hard-wearing sole and piping made of Hypalon – the same industrial rubber used to create inflatable military rafts. This sole simply does not wear out.

DIMENSIONS & FITTING

LIKE A GLOVE

These measurements represent the inner capacity of the case. If you are unsure about the fit for your guitar, make sure it does not exceed any of the maximum dimensions shown just to be safe. This case is designed to fit standard body dreadnought guitars including Fender, Gibson, Martin, Yamaha, Washburn. Also usually the best fit for full hollow body guitars and archtops.

Internal Dimensions: 42″ x 16″ x 5″ (106.7cm x 40.6cm x 12.7cm)
External Dimensions: 44.5″ x 18″ x 7″ (113.0cm x 45.7cm x 17.8cm)
External Pocket Dimensions: 11″ x 14.5″ x 1.5″ (27.9cm x 36.8cm x 3.8cm)
Weight: 7.3lbs (3.3kg)

The post Mono M80 Classic Acoustic/Dreadnought Guitar Case – M80-AD-BLK appeared first on Matt's Music Center.

Classic Electric Guitar Case, Black

The Classic Electric Guitar Case can be found in the hands of influential musicians from Brooklyn to Seoul to Sao Paulo and everywhere in between. Its patented protective features and light weight hybrid shell revolutionized the way we travel with our guitars, and brought musician luggage into the 21st century. Years of feedback from working artists has driven countless tiny improvements, proving that this original design just gets better with time. If you own a guitar, you should own a MONO.

DROP-PROOF

The patented Headlock® design provides a level of protection worthy of the finest instruments. Your guitar quickly straps in and remains stabilized during transport. The headstock is suspended inside the case, saving the guitar from both side and rear impacts that could otherwise snap the neck. Extensive testing reveals that “Hardcase protection” is a myth, as the Headlock® equipped M80 outperforms traditional wood and plastic hard cases in every way.

IMPACT DEFLECTION & STRAP PIN PROTECTION

Integral ABS panels deliver hardcase protection at a fraction of the weight. (MONO cases weigh in at about 75% less than their hardcase counterparts.) The reinforced outer shell of the M80 hybrid case absorbs and deflects hard impact away from the vulnerable areas of the guitar.

Hi-density foam bumpers divert vertical impacts out and around the lower bout of the guitar, away from the strap pin.

SMART STORAGE

Most MONO cases come equipped with the triple D-ring attachments required for the optional Classic Tick Accessory Case, the modular tool case designed to extend the storage capacity of your guitar case. The Classic Tick Accessory Case seamlessly and securely attaches to the case as shown. Some older cases may not be Tick-ready – please contact support if you have questions about the Tick-compatibility of your MONO case.

PLUG AND PLAY

Everything in its place. Specialized storage compartments put your gear right where you need it.

SECRET STASH

The hidden upper pocket keeps your wallet, keys, and cell concealed. Pen slots double as tool storage. Business card storage and a durable key clip is also included.

BUILT TO LAST

WEAR IT OUT

We build our cases to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. Outside, the water-resistant Sharkskin shell keeps you on the move, rain or shine. 100% animal free.

RIVETED HANDLE

Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high grade webbing provides a super comfortable grip.

HYPALON SOLE

All M80 cases feature a hard-wearing sole and piping made of Hypalon – the same industrial rubber used to create inflatable military rafts. This sole simply does not wear out.

DIMENSIONS & FITTING

LIKE A GLOVE

These measurements represent the inner capacity of the case. If you are unsure about the fit for your guitar, make sure it does not exceed any of the maximum dimensions shown just to be safe. This case is designed to fit standard body electric guitars including Fenders like Teles and Strats, Gibsons like Les Pauls and SGs, ESP and many others.

Internal Dimensions: 41.5″ x 14.5″ x 3″ (105.4cm x 36.8cm x 7.6cm)
External Dimensions: 43.7″ x 16.5″ x 4.7″ (111.0cm x 41.9cm x 11.9cm)
External Pocket Dimensions: 11″ x 14.5″ x 1.5″ (27.9cm x 36.8cm x 3.8cm)

The post Mono M80 Classic Electric Guitar Case – M80-EG-BLK appeared first on Matt's Music Center.

Classic Dual Bass Guitar Case, Black

A second bass is a must-have on stage or in the studio. But in transit, carrying two bass guitars has always been a necessary evil. We set out to design an elegant solution to this problem. Our driving criteria was to offer each guitar the same protection as our single M80 hybrid case. After a year of prototyping, the Z-form design was perfected (patents pending). The end result is an incredibly light weight, extremely rugged Classic Dual Bass Guitar Case. A first of its kind. Go play.

360° PROTECTION

DROP-PROOF

The patented Headlock® design provides a level of protection worthy of the finest instruments. Your guitars quickly strap in and remain stabilized during transport. The headstocks of both guitars are suspended inside the case, saving them from both side and rear impacts.

STRAP PIN PROTECTION

Hi-density foam bumpers divert vertical impacts out and around the case, away from the strap pin.

Integral ABS panels deliver hardcase protection at a fraction of the weight. The reinforced outer shell of the case absorbs and deflects hard impact away from the vulnerable areas of the guitar.

SMART STORAGE

ONE OR TWO GUITARS

This patented “zig zag” design creates a completely separate case for each guitar. That means both headstocks are protected with our Headlock® suspension system and strap pin bumpers. It also means the M80 Dual can be used with 1 or 2 guitars – something you’ll appreciate on the road. Additionally, the Z-form design allows for immediate access to either instrument.

TICK-READY

Most MONO cases come equipped with the triple D-ring attachments required for the optional Classic Tick Accessory Case, the modular tool case designed to extend the storage capacity of your guitar case. The Classic Tick Accessory Case seamlessly and securely attaches to the case as shown. Some older cases may not be Tick-ready – please contact support if you have questions about the Tick-compatibility of your MONO case.

PLUG AND PLAY

Everything in its place. Specialized storage compartments put your gear right where you need it.

The hidden upper pocket keeps your wallet, keys, and cell concealed. Pen slots double as tool storage. Business card storage and a durable key clip are also included.

BUILT TO LAST

WEAR IT OUT

We build our cases to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. Outside, the water-resistant Sharkskin shell keeps you on the move, rain or shine. 100% animal free.

RIVETED HANDLE & HYPALON SOLE

Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high grade webbing provides a super comfortable grip.

All M80 cases feature a hard-wearing sole and piping made of Hypalon – the same industrial rubber used to create inflatable military rafts. This sole simply does not wear out.

DIMENSIONS & FITTING

Internal Dimensions: 48″ x 14.5″ x 3″ (121.9cm x 36.8cm x 7.6cm)
External Dimensions: 49.2″ x 16.9″ x 4.7″ (125.0cm x 42.9cm x 11.9cm)
External Pocket Dimensions: 11″ x 14.5″ x 1.5″ (27.9cm x 36.8cm x 3.8cm)
Weight: 9.92lbs (4.5kg)

The post Mono M80-2B-BLK Classic Dual Bass Guitar Case appeared first on Matt's Music Center.

Classic Tick Accessory Case 2.0, Black

Less is more. Unless you’re talking about gear. We all try to pare down our rig as much as possible for touring, but sometimes you just need… more. More cables. Effects. A hard drive. Maybe even a spare t-shirt or two. That’s why we’ve created Classic Tick Accessory Case 2.0 – to accommodate those extras. The beauty of it? Aside from the fact you won’t be overstuffing your guitar cases, you won’t have to bring extra carry-on. The Tick is designed to become one with your MONO case, counting as one piece of luggage too. Easy.

STEALTH STORAGE

ALL ACCESS

With its integrated design, the Classic Tick Accessory Case 2.0 doesn’t get in the way of accessing your guitar or bass – so you won’t need to remove it from the case. If you do want to remove it, it’ll detach in seconds. And once your guitar’s out, the Tick becomes your workstation. Unzip the front panel of the Tick and your cables, strings and tools are right there for pre-show tune-ups.

DETACH IN SECONDS

The Classic Tick Accessory Case 2.0 attaches quickly and securely to any Tick-ready MONO guitar case, and detaches just as easily. It’s as simple as opening the military strength straps at the top and the back of the Tick, and feeding them through your case’s powder-coated steel D-rings. This creates a 3 point connection, for extra secure attachment. Most of our guitar and bass cases are now shipped Tick-ready (some of our cases may not be – please contact support if you have questions about the Tick-compatibility of your MONO case).

BUILT TO LAST

WEAR IT OUT

We build our cases to military specs, using only materials with extreme resistance to abrasion and the elements. Steel-riveted handles, high-density padding and a water-resistant shell ensures a safe journey through harsh conditions.

By now you’d have guessed that the Tick is made with a focus on quality, so we use YKK zips for extra reliability. They’ve also been engineered with a thread hole for locks – to help keep your gear nice and safe. And our material is animal free.

DIMENSIONS & FITTING

LIKE A GLOVE

The Classic Tick Accessory Case 2.0 is sized to fit small pedalboards, including the Nano by Pedaltrain. But really, you can fit any combination of things – whether it’s pedals, personal items, or your cables and headphones (secured by the cable strap). There’s also a mesh pocket inside for those bits and pieces you want to keep safe and visible. And of course, there’s dedicated space for those all-important tools that can help you avert disaster. These measurements represent the inner capacity of the Tick. If you are unsure about the fit for a particular pedal, amp, etc, it’s best to make sure it doesn’t exceed any of the maximum dimensions shown here.

Internal Dimensions: 14″ x 7″ x 3.5″ (35.6cm x 17.8cm x 8.9cm)
Weight: 21oz (600g)

The post Mono Classic Tick Accessory Case 2.0 – M80-TICK-V2-BLK appeared first on Matt's Music Center.

The Sleeve Bass Guitar Case is designed to be a minimalist solution for traveling light and simple, and it is where MONO’s innovative protection and high quality construction standards are merged into a super slim and stylish design.

360° PROTECTION

Like the Vertigo, the Sleeve Bass Guitar Case is Top-Loading® for quick, stand-up access. Its design allows you to quickly unzip the case and pull your bass out from the top. This is enabled by a hidden diagonal hinge on the front panel of the case. Once unzipped, the case naturally opens out and to the right. No need to lay the case down on the floor. Easy access.

The Sleeve Bass Guitar Case features a slimmer variation of the Headlock® — MONO’s patented neck suspension system. This slimmer Headlock® is molded from solid, shock-absorbing EVA rubber to protect the neck and headstock from impact during falls. When your bass is zipped-in, its neck is automatically secured inside the Headlock®’s contoured groove.

At the bottom, the case features a super slim EVA insole to keep the body off the ground and protect the strap pin from bottoming-out when the case is put down too hard.

SMART STORAGE

The Sleeve Bass Guitar Case features a messenger bag style storage pouch that’s perfect for small laptops, tablets, notebooks, cables and other extras that you might need when traveling light. A small interior mesh pocket keeps those little, critical items close at hand.

BUILT TO LAST

WEAR IT OUT

MONO cases are built to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. Outside, the water-resistant shell keeps you on the move, rain or shine. 100% animal free.

RIVETED HANDLE & CUSTOM STEEL BUCKLE

Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high grade webbing provides a super comfortable grip.

A custom steel buckle is used to secure the storage pouch with industrial seatbelt webbing. Simple and secure with a nice touch of style.

DIMENSIONS & FITTING

LIKE A GLOVE

The above measurements represent the inner capacity of the Sleeve Bass Guitar Case. If you are unsure about the fit for your instrument, make sure it does not exceed any of the maximum dimensions shown. The Sleeve is designed for standard, solid-body electric instruments. Hollow-body and other instruments with an overall maximum thickness (including bridge, pick-ups, knobs, toggles, etc.) of 3″ are not recommended. Please check with support if you have fitting questions.

Internal Dimensions: 48″ x 15.5″ x 3″ (12.2cm x 39.4cm x 7.6cm)
External Dimensions: 50.5″ x 17″ x 2.5″ (128.3cm x 43.2cm x 6.4cm)
External Pocket Dimensions: 10.5″ (Short) / 17″ (Tall) x 14″ x 2″ (26.7cm / 43.2cm x 35.6cm x 5.1cm)
Weight: 5lbs (2.3kg)

**The Sleeve Bass Guitar Case is not Tick-compatible.

The post Mono M80 Sleeve Bass Guitar Case – M80-SEB-BLK appeared first on Matt's Music Center.